RK2040. Audio’s powerful rack-mounted receiver solution
Compact IU rack with four diversity receivers
This compact 1U, 19-inch rack is capable of accommodating up to four diversity receivers – the minimum specification unit has two receivers. Additional receiver modules can be purchased separately. Each receiver has an individual LCD display, showing RF levels for both sides of the diversity, audio level, low transmitter battery level and name, frequency and audio output level for each artist.
Up to 24MHz switching bandwidth on receivers
Each receiver has 32 pre-programmed frequencies and an increased switching bandwidth of up to 24MHz. Includes a built-in active distribution amplifier to allow all four receivers (or up to eight by cascading two racks) to be fed from one set of antennae.
DC powered rack 10-18v
The RK2040 can be mains powered via an AC/DC adapter, or can be powered from any DC source with voltages from 10-18 volts (so, for example, a car battery can be used), via a four-pin XLR socket.
Remote monitoring from up to 4000 feet away
The rack features Audio’s custom designed RS485 PC interface for remote monitoring of receivers. A PC can control and monitor all functions from up to 4,000 feet (1,219.2 m) away from the racks.
Up to 92 receivers, one cable
Up to 24 racks can be linked together with only one cable needed to link to the PC. So up to 92 receivers can be monitored over one cable. The software to monitor the racks is included in the price.
|Frequency range||from 470 – 1000MHz|
|Number of diversity receivers||Up to 4|
|Active distribution amplifier bandwidth||24MHz, with phantom powering for Audio Ltd masthead amplifier|
|Powering||10 – 18 Volts DC via 4 pin XLR male socket|
|Antenna inputs||2 x BNC 50Ω|
|RF outputs||2 x BNC 50Ω|
|Sensitivity||-98dBm for 40dB SINAD|
|Audio outputs||4 x 3 pin XLR|
|Output level||+14 dBu maximum, transformer balanced|
|Frequency response||50Hz – 18kHz ±1dB|
|Headphone output||Standard 6.5mm (1/4 inch) jack socket with adjustable level|
|Display and controls||Backlit LCD display with comprehensive, intuitive set up of individual receiver parameters via a smiple 4 button interface|
|PC connection||2 x RS485 9 pin sub-D type connector.
One connector connects to PC via RS485 to RS232 adapter (available seperately).
Maximum cable run for twisted pair cable - 1000m.
Second connector allows subsequent racks to be daisy-chained
|Size||1U high 19-inch frame|
|HX2040 handheld transmitter||miniTX transmitter||TX2040 transmitter|