MX non-diversity receiver

Entry level professional sound

Affordable high quality audio

An affordable solution for entry level sound recording or professionals on a tight budget, the MX is a single channel receiver. It delivers extremely high quality audio in one lightweight and very compact unit.
So compact, in fact, that it can be fitted to a wide range of small, handheld video cameras using our specially designed hot shoe bracket. It’s powered by a single 1.5V LR6 alkaline AA size battery so there is no problem using it even with cameras that do not offer external power as standard.

And a reliable IEM system

The MX receiver has an electronically balanced output which can be switched to headphone output which means it can be used as an in ear monitor (IEM). When the receiver is used as an IEM, the menu navigation dial switches to being the volume control.

Easy Setup

Easy setup menus

This unit is set up using a series of menus which are viewed in the OLED display. You are guided through the set up by a series of easy-to-read symbols and all parameters are selected using three buttons on the unit’s front panel. It’s so straightforward you won’t need any further written instructions from us.


OLED menu driven displays

This unit has an organic light emitting diode (OLED) display which is extremely clear yet consumes very little power. The screen shows all the important information you need to monitor the system when in use and also displays the En2’s unique easy set-up menu.


Frequency scan function

In an increasingly crowded environment, you need to be able to select usable frequencies on location quickly. So, all receivers in the En2 range have a built-in scan facility which allows you to scan for a free channel or scan for the transmitter. In addition, on this unit, selecting ‘tune’ mode brings up a spectrum analyser type display which allows you to see the RF in the local environment.

En2 MX Receiver Specifications

Frequency range 470 - 960MHz (specify at time of order)
Switching bandwidth Up to 24MHz in 25kHz steps
Number of audio channels 1
Receiver type Non-diversity
Number of frequency tables 1
Number of factory pre-set frequencies 32
Number of user selectable frequencies 32 (selectable in 25kHz steps)
Scan Modes Scan for free channel
Scan for transmitter
Modulation Mode Wideband FM
Frequency stability ±0.002%
Sensitivity -96dBm (2.8uV) for >40dB SINAD
Image rejection > 80dB
Audio frequency response 80 – 18kHz
Signal-to-noise ratio >100dB (±45kHz deviation)
Total harmonic distortion <0.3% typ.
Audio output voltage 0dBV typ. (±45kHz deviation, 1kHz)
Audio output attenuator 0-30dB adjustable
Monitor/headphone output 30mW at 32?, adjustable
Output connector 3.5mm stereo screw-locking
Display OLED blue, 128x32 pixels
Control 3 button navigation switch
Battery type 1 x 1.5V Alkaline LR6 AA size
Battery life 6 to 8 hrs depending on battery type
Audio Ltd recommend use of NiMh
External supply voltage 6 - 18V DC (150mA @ 12V)
Operating temperature range -20°C to +55°C
Weight 118 grams
Dimensions 63mm (W) x 82mm (H) x 20mm (D)
Optional Accessories Flexible clear antennae straight
Flexible clear antennae right-angle
Output cable 3.5mm to XLR male connector
Monitor/Headphone output cable
Other output cable types available on request
Camera Mount with hot-shoe attachment
Neoprene Pouch

Related Products

Scroll to top