The CX2-P slot in receiver
Made to fit Panasonic and Ikegami cameras
Total flexibility anywhere in the world
The CX2-P is a twin channel, true diversity receiver specifically designed to fit neatly into most professional Panasonic and Ikegami slot in cameras. It is equipped with two true diversity receivers which can be linked to separate transmitters and features a large 80MHz switching bandwidth making it ideal for ENG crews and documentary makers who work in different locations around the world. Up to 10 different frequency tables can be preset in the unit giving it enormous flexibility and within each table, individual frequencies can be manually selected using the OLED menu displays. It is also equipped with a digitally controlled tracking filter that automatically tracks the chosen frequency table and allows greater selectivity for the frequency table being used.
The CX2-P draws its power from the camera itself. Separate batteries are not required.
Easy setup menus
This unit is set up using a series of menus which are viewed in the OLED display. You are guided through the set up by a series of easy-to-read symbols and all parameters are selected using three buttons on the unit’s front panel. It’s so straightforward you won’t need any further written instructions from us.
OLED menu driven displays
This unit has an organic light emitting diode (OLED) display which is extremely clear yet consumes very little power. The screen shows all the important information you need to monitor the system when in use and also displays the En2’s unique easy set-up menu.
Frequency scan function
In an increasingly crowded environment, you need to be able to select usable frequencies on location quickly. So, all receivers in the En2 range have a built-in scan facility which allows you to scan for a free channel or scan for the transmitter. In addition, on this unit, selecting ‘tune’ mode brings up a spectrum analyser type display which allows you to see the RF in the local environment.
|Frequency range||470 - 865MHz (specify at time of order)|
|Switching bandwidth||Up to 100MHz in 25kHz steps|
|Number of audio channels||2 (can be operated individually if required)|
|Tracking filters||Front end digitally controlled tracking filters|
|Number of frequency tables||Up to 10|
|Number of factory pre-set frequencies||32 in each table|
|Number of user selectable frequencies||32 in each table (selectable in 25kHz steps)|
|Scan Modes||Scan for free channel
Scan for transmitter
Table scan with spectrum analyser display in 'Tune' mode
|Modulation Mode||Wideband FM|
|Sensitivty||-96dBm (3.5uV) for >40dB SINAD|
|Image rejection||> 80dB|
|Audio frequency response||50 – 18kHz|
|Signal-to-noise ratio||>100dB (±45kHz deviation)|
|Total harmonic distortion||<0.3% typ.|
|Audio output voltage||0dBV typ. (±45kHz deviation, 1kHz)|
|Audio output attenuator||0dB, -12dB, -24dB, -36dB (selectable)|
|Output connector||25 pin D-type|
|Display||OLED blue, 128x32 pixels|
|Control||3 button navigation (left, right and select)|
|External supply voltage||6 - 18V DC (150mA @ 12V)|
|Operating temperature range||-20°C to +55°C|
|Dimensions||67mm (W) x 119mm (H) x 18mm (D)|
|Optional Accessories||Flexible clear antennae (straight)
Flexible clear antennae (right-angle)